Comfort Pro takes the health of your family and ours very seriously. Read how we are taking precautions HERE

AC Not Cooling: Reasons And Troubleshooting

Comfort Pro > Blog > AC Not Cooling: Reasons And Troubleshooting

AC Not Cooling: Reasons And Troubleshooting

There are various reasons your air conditioner can overheat, fail to chill or cease operating when it’s scorching outside. Running an air conditioner that is not blowing cold air could endanger your entire air conditioner and require AC replacement in Tampa sooner than expected.

Is AC Not Cooling Down? Learn the Six Causes And How to Fix An AC

  • Blown Fuse or a Tripped Breaker

Electricity is necessary for all air conditioners to function properly. The compressor would be able to compress the refrigerant if it were receiving enough power.

Solution:

  1. Start by inspecting the cables.
  2. Check if the fuse is blown or the amp breaker has tripped to address any fundamental electrical problems that may be the issue’s root.
  3. If so, flip it back over and check to see if the air conditioner is blowing cold air once more.
  • Blocked Filter

If the filters are blocked, the amount of air that can flow can be limited. Many air conditioners contain an internal switch that turns the AC unit off if the filters become too clogged.

Solution:

  1. In some circumstances, cleaning the filter makes sense, but the ideal solution is to replace the blocked filters.
  2. Contact a skilled professional for cleaning.
  • Defective Thermostat

Your air conditioner’s central nervous system is the thermostat. Either the thermostat is not set to an appropriate setting (below room temperature), or the batteries are empty or nearly empty.

Solution:

  1. Think about replacing the batteries.
  2. Reduce the temperature on the thermostat to the lowest setting if it still doesn’t work.
  3. Consult an HVAC expert for air conditioning repair in Tampa if it’s still not cooling effectively.
  • Obstructed Drain

The compressor for the AC can stop working if the drain is blocked. The fan might be performing flawlessly. The AC unit will ultimately run but not cool as a result.

Solution:

  1. Fortunately, unclogging an AC drain is not too difficult.
  2. Verify the location of the drain piping in your air conditioner.
  3. Remove any dirt, mold, leaves, hair, or algae from the piping and clean it.
  • Inefficient Compressor

Any AC unit’s compressor is a vital component. The refrigerant is not adequately compressed if there is any compressor issue. It indicates that the cooling coil won’t be as cold as it should be, preventing our air conditioner from producing chilly air.

Solution:

  1. Remove the panels and see whether the compressor is surrounded by debris.
  2. Check if cleaning the compressor can resolve the no cold air from the AC problem.
  3. Expert assistance for air conditioning repair in Tampa is typically necessary.
  • Frozen Coils

Low airflow caused a chain of events culminating in the inside AC unit’s parts freezing. Low airflow causes the compressor to work harder to compensate for the loss of airflow, which could cause AC components (particularly the cooling coil) to freeze over.

Solution:

  1. Run the air conditioner with the fan on but the cooling system off to get rid of the ice.
  2. You can use the air conditioner properly only after the cooling coils have been removed from the ice shell.

If you want a budget-friendly and trustworthy AC replacement in Tampa, Comfort Pro can help. Contact us at (813) 441-1110 to schedule an appointment.